|
Situation:
You launch HBAnyware and no HBAs are visible.
Resolution:
Try the following solutions:
Perform an 'lsmod' to see if the Emulex drivers
are loaded. Look for an error message on the command line stating the
lpfcdfc driver is not loaded. If this is the case, do an insmod of the
lpfc and lpfcdfc drivers and re-launch HBAnyware. Exit HBAnyware and run ../stop_hbanyware. Then
run ./start_elxhbamgr and ./start_elxdiscovery, and re-launch HBAnyware.
The HBAs should be visible. If they are not visible reboot your system.
|
